Products » SHEDs (Sealed Housing for Evaporative Determination)



Download a brochure on SHEDs: (242k)   ||  Español (279k)
Print this page.
    View SHED Gallery



(Photo courtesy of Subaru)


Webber EMI manufactures a wide range of SHEDs in a variety of sizes, ranging from 10 cu-ft Micro SHEDs to full sized Vehicle SHEDs capable of testing HD construction vehicles. Starting with one of our standard configurations, a SHED can be custom-built to our customer specifications with specific regard to size, window placement, access door type, and other performance or testing needs.

All Webber EMI SHEDs incorporate a modular-systems design that allows the basic Fixed Volume / Fixed Temperature (FV/FT) enclosure to be upgraded to full Variable Volume / Variable Temperature (VV/VT) enclosure -- even years later -- on-site, and after installation.


Top of Page

FV/FT Vehicle SHED

The Webber EMI Model 101 Vehicle SHED has been an industry standard for decades. It incorporates an entry-level Fixed-Volume / Fixed-Temperature (FV/FT) test system design that, even years later, can be upgraded into a full Variable-Volume / Variable-Temperature (VV/VT) SHED evaporative emissions testing system.

It is available in several standard sizes suitable for testing complete vehicles, motorcycles, small tractors, off-road vehicles, lawn mowers, small machines and hand-held equipment.


(Photo courtesy of Harley Davidson)





VV/VT Vehicle SHED

The Webber EMI Model 101 Vehicle SHED is also available as a Variable Volume / Variable Temperature (VV/VT) SHED. This SHED is designed to support a full range of test protocols and temperature profiles between 45 F and 120 F. Using the Webber EMI moveable roof system, absolute SHED volume is automatically controlled to maintain zero-differential pressure between the SHED interior and ambient laboratory conditions. It is designed for testing large equipment such as cars, trucks, tractors and other large machinery.


(Photo courtesy of Hyundai)





Top of Page

Mini SHED

The Webber EMI Model 102 Mini SHED is suitable for testing small equipment such as ATVs, lawn mowers and other objects equivalent in size.


(Photo courtesy of the California Air Resources Board)


Micro SHED

The Webber EMI Model 103 Micro SHED test system is designed specifically for Ultra-Low (ULEV) and Zero (ZEV) Emission level evaporative testing.

While incorporating most of the features associated with our full vehicle SHED systems, the Micro-SHED test system has been re-sized to facilitate automated evaporative testing of smaller complete utility products, sub-systems and discrete components such as fuel tanks, valves, hoses, and canisters. With the ability to detect HC emission changes as low as 0.1 ppm/ mass emissions as low as 0.10mg.


(Photo courtesy of Yachiyo of America)


Top of Page

Running Loss SHED

The Webber EMI Running Loss SHED is a modified version of our full-sized Vehicle SHED. This extra long SHED, equipped with special air handling equipment, a proportional speed fan, vehicle combustion makeup air, and an auxiliary personnel door, is combined with a centrally located dynamometer to accept both front- and rear-wheel drive vehicles.

In addition to full exhaust emissions testing capability, this SHED supports all applicable diurnal evaporative emissions test protocols.


(Photo courtesy of the California Air Resources Board)





On-Board Refueling & Vapor Recovery

Webber EMI can provide On-Board Refueling / Vapor Recovery (OR/VR) capability to any of our SHEDs either new or existing with on-site installation. Locations, height and amount of ports can be placed in a variety of places to best suite the end user.

Using several different methods, vehicles or other fuel-dependent machines can be re-fueled while the SHED is sealed.


(Photo courtesy of Volkswagen)





All Webber EMI SHEDs are available as full VV/VT enclosures, or as FV/FT enclosures that can later be upgraded to VV/VT capability.

Top of Page

SHED Systems
 
Micro SHED
(10-100 cu ft)
Mini SHED
(100-1000 cu ft)
Vehicle SHED
(1000-2000 cu ft)
 

Fixed Volume / Fixed Temperature (FV / FT)
Standard Volume
64 cu ft
324 cu ft
1680 cu ft
ID (W x H x L)
4'x4'x4'
6'x6'x9'
10'x8'x21'
Temperature
72° F
72° F
72° F
Vehicle Door
Side-hinge
Side-hinge
Top-hinge
Heat & Cool Unit
Self contained
Self contained
Self contained
Purge System
Single poppet valve
Single poppet valves
Single poppet valve
 

Options

(Available at time of manufacture only.)
Volume
Custom volume
Custom length
Custom length
Vehicle Door
Guillotine or
Top/Bottom-hinge
Guillotine or
Top/Bottom-hinge
Guillotine
Personnel Door
--
--
Side-hinge
Heating & Cooling Unit
Facility dependent
Facility dependent
Facility dependent
Purge System
--
--
Dual poppet valves
 

Upgrades

(Available both at manufacture and after installation.)
 

Variable Volume / Variable Temperature (VV / VT)
Volume System
Moveable Roof,
Mass-Flow Balance,
or Bag system
Moveable Roof,
Mass-Flow Balance,
or Bag system
Moveable Roof,
Mass-Flow Balance,
or Bag system
Standard Temp Range
65° F - 105° F
65° F - 105° F
65° F - 105° F
Extended Temp Range
45° F - 145° F
45° F - 145° F
45° F - 145° F
 

Fuel Tank Temperature Management System (FTTMS)
Heater Outlets
1
Up to 3
Up to 3
Heater Power
2kW / outlet
2kW / outlet
2kW / outlet
Auxiliary Outlets
1
Up to 2
Up to 2
Auxiliary Power
20A / outlet
20A / outlet
20A / outlet
 

Onboard Re-fueling / Vapor-Recovery (OR / VR)
Nozzle Access
Quick Disconnects
Glove & Nozzle Boots
or Quick Disconnects
Glove & Nozzle Boots
or Quick Disconnects

If you need additional equipment not shown here, contact us with your requirements.

Why choose a Webber EMI SHED?

Download a brochure on SHEDs: (242k)   ||  Español (279k)

Top of Page