Products » Canister Conditioning Bench


Download a brochure on Canister Conditioning Benches: (91k)		 Print this page.



100000-110 Canister Conditioning Bench

The Webber EMI Canister Conditioning Bench, model 110 utilizes our highly-intuitive, Windows-based control system to allow a user to quickly set up and precisely load charcoal canisters in accordance with all applicable EPA and CARB protocols.

In standard form, the Bench is configured with a single station which allows the user to precondition and load either a single canister or two charcoal canisters sequentially. This Bench can also be ordered with an optional second station that then allows the user to load two canisters simultaneously or up to four canisters sequentially.

The Webber EMI proprietary software insures faster set-up times and that the Bench is easy-to-use. The system also provides a comprehensive data report for each canister loaded and includes a built-in calibration utility.

Top of Page
Standard features
  • Meets all required EPA/CARB conditioning procedures.

  • Sturdy modular enclosure and system design for ease of installation and expansion.

  • Independent, sequential, and multiple canister loading operations.

  • Minimal operator setup and system maintenance requirements.

  • All ‘wetted’ components: Stainless Steel, Teflon®, or PVC.

  • Ability to confirm calculated canister bed volumes & working capacity via EPA / CARB approved ‘breakthrough’ methodology.

  • Canister Loading: User selectable Butane-to-Nitrogen percentage by volume.

  • Butane/Nitrogen loading with high capacity vacuum-driven canister purge.

  • Software selectable flow rates –

    • Butane Loading to CFR regulations

    • Purge Air Flow to CFR regulations

    • 50% Butane to 50% Nitrogen mixture composure by volume


Bench Control
  • Windows-based, proprietary software.

  • Controls up to two stations.

  • User-configurable parameters.

  • Displayed ‘station status’ and progress bar.

  • Network based.


Data Acquisition
  • Data and alarm logging.

  • Comprehensive test report generation.

  • Temperature and humidity charting.

  • Flowrate Charting.

  • Mass Logging.


Optional features
  • Second station with separate controls.

  • Onboard UPS (uninterrupted power supply).

  • L.E.L. (lower explosive limit) alarm system.

  • Barometric pressure monitoring.

  • Humidification control of purge air.

  • Butane/Nitrogen Ratio from 0-100%


General Specifications
  • Flow Rates:

    • Purge to 50 slpm

    • Butane to 1400 grams/hour

    • Nitrogen to 50 slpm

  • Enclosure dimensions: 72”H x 24”W x 36”D.

  • Mass Flow Controller Accuracy: +/- 1% of full scale.

  • Repeatability: +/- 0.15% of full scale.

  • Power requirements: (2 x) 120 / 220 VAC 50/60Hz, 20 Amp single phase.


Download a brochure on Canister Conditioning Benches: (91k)
Top of Page